Fabrication and Excellent Antibacterial Activity of Well-defined CuO/Graphdiyne Nanostructure

Copper oxide(CuO),due to its low cost,good chemical and physical stability,has recently been given special attention as a potential candidate for antibacterial agents.However,developing novel CuO nanocomposites with improved antibacterial property and unraveling the interface promotion mechanism has been a fundamental challenge for decades.Herein,well-defined CuO/graphdiyne(CuO/GDY)nanostructures with uniformly anchored CuO nanoparticles(ca.4.5 nm)have been fabricated.The CuO/GDY nanostructure exhibited superior E.coli inactivation efficiency,which is nearly 19 times and 7.9 times higher than the bare GDY and commercial CuO,respectively.The improved E.coli inactivation performance was mainly due to the increased reactive O2-species generated by the activation of molecular O2 over CuO/GDY surface.These findings demonstrate the efficient antibacterial activity of well-defined CuO/GDY nanostructures and provide insights on the development of efficient GDY-based antibacterial materials.     

Esterification of Oleic Acid to Produce Biodiesel over 12-Tungstophosphoric Acid Anchored Two-dimensional Zeolite

Biodiesel has emerged as a non-toxic, biodegradable, and renewable fuel substitute that can be readily produced via the esterification reaction of free fatty acids. The present work explores the potential of 12-tungstophosphoric acid(TPA) anchored two-dimensional(2D) ITQ-2 zeolite(TPA/ITQ-2) as heterogeneous acid catalysts for biodiesel production. TPA/ITQ-2 material was prepared by swelling, delamination, and subsequent wetness incipient impregnation approach. The prepared catalysts were comprehensively characterized by powder X-ray diffraction, N₂ adsorption/desorption, temperature-programmed desorption of ammonia, flou-rier transform infrared spectroscopy, and transmission electron microscopy. The catalytic activity of TPA/ITQ-2 for biodiesel production was evaluated by the esterification reaction of oleate acid with methanol. Process parameters, such as reactant molar ratio and TPA loading were optimized. Due to the superior mass transfer and adequate stable acid sites, 2D TPA/ITQ-2 showed a higher catalytic activity and a better recyclable stability than the 3D and layered TPA/zeolites. This work will provide new opportunities for the design of 2D zeolite-based acid catalysts for biodiesel production.     

Surface Functionalization of PEO Nanofibers Using a TiO2 Suspension as Sheath Fluid in a Modified Coaxial Electrospinning Process

Convenient and integration fabrication process is a key issue for the application of functional nanofibers. A surface functionalization method was developed based on coaxial electrospinning to produce ultraviolet(UV) protection nanofibers. The titanium dioxide(TiO₂) nanoparticles suspension was delivered through the shell channel of the coaxial spinneret, by which the aggregation of TiO₂ nanoparticles was overcome and the distribution uniformity on the surface of polyethylene oxide(PEO) nanofiber was obtained. With the content of TiO₂ increasing from 0 to 3%(mass fraction), the average diameter of nanofibers increased from (380±30) nm to (480±100) nm. The surface functionalization can be realized during the electrospinning process to gain PEO/TiO₂ composite nanofibers directly. The uniform distribution of TiO₂ nanoparticles on the surface of nanofibers enhanced the UV absorption and resistance performance. The maximum UV protection factor(UPF) value of composite nanofibers reaches 2751. This work presented a novel surface-functionalized way for the preparation of composite nanofiber, which has great application potential in the field of micro/nano system integration fabrication.     

Organic Nanocrystals Based on a Solid-emission-tunable AIEgen for Cell Imaging

The development of fluorescent nanocrystals based on organic small molecules is of great importance in bioimaging due to the merits of easy modification,high brightness and excellent photostability,however suffering from the emission-detrimental aggregation-caused quenching(ACQ)effect.Herein,we successfully designed and synthesized an AIE-active di(N,N-dimethylaniline)-dibenzofulvene(named as NFTPE),which exhibits the crystallization-induced emission enhancement(CIEE)effect.Interestingly,two types of yellow-and orange-emissive crystals for NFTPE were obtained,exhibiting aggregation microenvironment-dependent emission tuning in the solid state.Single-crystal analysis and density functional theory(DFT)calculations reveal that different aggregation microenvironments result in the distinct molecular conformation for various emission.Excitingly,the crystallization of NFTPE in an aqueous solution under the assistance of amphiphilic PEG polymer matrices could be monitored in situ by the fluorescence changes,facilitating the preparation of NFTPE nanocrystals(NFTPE-NCs)by adjusting the aggregation microenvironment.The obtained NFTPE-NCs exhibit the superior performance in cell imaging in respect to high brightness,photostability,and biocompatibility,thus demonstrating the potential in bioimaging applications.     

中性或弱酸性体系下锌基水系电池负极材料研究进展

锌具有原料丰富、质量轻便、金属导电性与延展性好以及理论比容量高等优势,可以作为绿色可充电电池的理想电极材料。其中,以中性或弱酸性水溶液为电解质、锌为负极的锌基水系电池具有安全性高、电池材料廉价无毒、制备工艺简单、环境友好等特点,在储能和动力电池领域具有极高的应用价值和发展前景。但电池充放电过程中伴随的锌枝晶、析氢、腐蚀、钝化等问题限制了其实际应用。本文综述了锌基水系电池负极存在的问题及当前的解决策略,并对其负极研究发展方向进行了展望。     

Enantioselective Diels–Alder reactions with left-handed G-quadruplex DNA-based catalysts

Since the discovery of left-handed G-quadruplex (L-G4) structure formed by natural DNA, there has been a growing interest in its potential functions. This study utilised it to catalyse enantioselective Diels-Alder reactions, considering its different optical rotation compared to an ordinary G4. It was determined that when L-G4 was used with a combination of copper(II) ions, there was a good enantioselectivity (?52% ee) without further addition of ligands. When further consideration was given by adding G4 ligands, G4 was further stabilised, even obtaining a better enantioselectivity (up to ?80% ee). Moreover, when using ligands that have regulatory effects on G4, the ee value can be adjusted. In this work, a minimal left-handed G4 was reported. A follow-up study was also conducted, which recovers that the minimal left-handed G4 remains its catalytic effect and enantioselectivity, but is not so effective as the former case. This indicates that a complete G4 structure is relatively conducive to chiral catalysis.     

基于酶辅助靶标循环的适体传感器灵敏检测中药中黄曲霉毒素B1

该文基于酶辅助靶标循环信号放大策略构建了用于黄曲霉毒素B1(AFB1)高灵敏检测的化学发光适体传感器。以G-四链体/氯化血红素DNA酶为信号分子设计了免标记的适体探针H1-S1和发夹探针H2。适体探针结合目标AFB1,在核酸外切酶I辅助下,触发靶标循环反应产生发夹H1。发夹H1与H2杂交,释放出完整的G-四链体序列,并进一步与氯化血红素结合形成G-四链体/氯化血红素DNA酶。DNA酶通过催化氧化鲁米诺-H2O2化学发光体系产生化学发光信号,实现AFB1的放大检测。在最优实验条件下,化学发光强度与AFB1质量浓度的对数在0.001~100 ng/mL范围内呈良好的线性关系,相关系数(r2)为0.9955,检出限为0.93 pg/mL,回收率为93.7%~107%。该适体传感器操作简单、灵敏度高、特异性好,在黄曲霉毒素污染检测方面具有良好的应用前景。     

基于硅基硼掺金刚石电极的电化学-原位核磁共振波谱电解池的设计、制备与可行性研究

电化学与核磁共振波谱联用技术（EC-NMR）可以实时监测电化学反应过程,从分子水平阐释反应机理,是一种非常有前景的无损在线检测技术。本文首次报道以硅基硼掺金刚石（Si/BDD）作为工作电极的原位EC-NMR三电极单室电解池的设计和制作。研究表明,由于尺寸12.5 mm × 1.2 mm × 0.5 mm的Si/BDD电极在核磁检测区的体积较小且电极材料厚度较薄,因此该电极对射频场的阻碍较小,对磁场均匀性破坏也相应较小。运用自制的EC-NMR电解池并以经典的对苯二酚（QH ₂）电氧化生成对苯二醌（Q）作为模型体系,原位研究了该电化学反应的整个动态过程。在1.2 V恒电位下电解0.1 mol·L^-1 QH₂ 64分钟,监测到位于6.83 ppm处的Q特征峰逐渐生成,反应过程中核磁谱峰未发生裂分或明显的展宽。结果表明,应用本文所设计并制备的原位EC-NMR电解池,可有效对电化学反应物和产物进行定性、定量分析,将可在后续的电化学原位核磁波谱研究中发挥重要作用。     

Theoretical study of the structural and energetic properties of platinum clusters with up to 60 atoms

Structural Chemistry - Applying a theoretical approach that combines an efficient and fast global optimization based on genetic algorithms (GA) to search in structure space and the parameterized...     

Sustainable Route for Synthesizing Aluminosilicate EU-1 Zeolite

Developing sustainable routes for the synthesis of zeolites is still a vital and challenging task in zeolite scientific community. One of the typical examples is sustainable synthesis of aluminosilicate EU-1 zeolite, which is not very efficient and environmental-unfriendly under hydrothermal condition due to the use of a large amount of water as solvent. Herein, we report a sustainable synthesis route for aluminosilicate EU-1 zeolite without the use of solvent for the first time. The physicochemical properties of the obtained EU-1 zeolite are characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetry-differential thermal analysis (TG-DTA), N₂ sorption, inductively coupled plasma (ICP) analysis, and solid nuclear magnetic resonance (NMR), which show the product has high crystallinity, uniform morphology, large BET surface area, and four-coordinated aluminum species. Moreover, the impact of synthesis conditions is investigated in detail. The sustainable synthesis of aluminosilicate EU-1 zeolite under solvent-free